CPM, RPM and what you actually keep
Three numbers get confused constantly. Sorting them out removes most of the disappointment.
| Number | What it is | Who sees it |
|---|---|---|
| CPM | What advertisers pay per thousand impressions | Advertisers and YouTube |
| Creator share | 55% of ad revenue on long-form | Split automatically |
| RPM | Your total revenue per thousand views, after every cut | You, in Analytics |
The calculator works from CPM and applies the creator share. RPM will usually come out lower, because RPM counts all views while ads only run on some of them.
Practical version: views / 1000 x CPM x 0.55. That is the ceiling, not the expectation.
CPM by niche and audience country
Audience location matters more than niche. The same video about the same topic earns several times more with a US audience than with a mixed one. The table below shows the span within each niche.
| Niche | Tier 1 audience | Mixed audience | Tier 3 audience |
|---|---|---|---|
| Finance, investing | $18 to $40 | $9 to $20 | $4 to $9 |
| Business, B2B software | $14 to $32 | $7 to $16 | $3 to $7 |
| Tech, gadgets | $9 to $20 | $5 to $11 | $2 to $5 |
| Health, fitness | $7 to $16 | $4 to $9 | $2 to $4 |
| Education, how-to | $5 to $12 | $3 to $7 | $1.5 to $3 |
| Home, DIY | $4 to $10 | $2 to $6 | $1 to $2.5 |
| Gaming | $2.5 to $7 | $1.5 to $4 | $0.8 to $2 |
| Entertainment, vlogs | $2 to $5 | $1 to $3 | $0.5 to $1.5 |
Read the third column when you are planning. Most new channels have a mixed audience, and planning on tier 1 numbers is how people conclude YouTube does not pay.
Why Shorts pay so little
Shorts revenue comes from a shared pool, not from ads attached to your video. The pool is divided by creator, and the denominator is enormous.
| Format | Per 100k views | What it is good for |
|---|---|---|
| Long-form, tier 1 | $500 to $2,200 | Revenue |
| Long-form, mixed | $150 to $800 | Revenue and growth |
| Shorts | $5 to $15 | Discovery only |
Treat Shorts as a top of funnel. If a Short works, the money is in the long-form video it sends people to, and in whatever you sell outside YouTube.
Five things that move your real number
- Season. Q4 CPMs run well above January. A video published in November earns more over its life than the same video in February.
- Ad load. Mid-rolls on an eight-minute video beat a single pre-roll on a four-minute one.
- Topic safety. Advertiser-unfriendly subjects get limited ads, which shows up as a low RPM with no explanation.
- Viewer intent. Tutorial viewers stay for the ad. Entertainment viewers skip it.
- Unmonetized views. Premium subscribers and ad blockers still count as views but not as revenue.
None of these are visible in the calculator. All of them are visible in your Analytics after a month.
Three worked examples
500,000 views, tech, mixed audience. CPM around $8, so roughly $2,200 before the split, about $1,200 after. Realistic range: $900 to $1,500.
2,000,000 views, gaming, tier 1 audience. CPM near $5, roughly $10,000 before the split, about $5,500 after. Realistic range: $4,000 to $7,000.
10,000,000 Shorts views. Pool revenue, not ad revenue. Realistic range: $500 to $1,500. The same effort in long-form with a strong niche would clear five figures.
These are ranges because they have to be. Anyone quoting a single number per view is selling something.
What a sponsorship is worth
Most mid-sized channels earn more from sponsors than from ads, which makes the calculator only half the picture. Rates are negotiated, but the market has settled into predictable bands.
| Average views per video | Typical integration rate | Typical dedicated video |
|---|---|---|
| 10,000 | $150 to $400 | $400 to $900 |
| 50,000 | $600 to $1,500 | $1,500 to $3,500 |
| 200,000 | $2,000 to $6,000 | $5,000 to $12,000 |
| 1,000,000 | $10,000 to $25,000 | $20,000 to $60,000 |
Two variables move these numbers more than subscriber count. Audience country, for the obvious reason, and audience intent. A finance channel with 60,000 views can out-earn an entertainment channel with 400,000.
The practical consequence is that optimising for RPM alone is a mistake. A channel that can deliver a specific audience to a specific product is worth more than its view count suggests.
Raising RPM without tricks
- Make longer videos. Mid-rolls need length. A twelve-minute video can carry two more breaks than a five-minute one.
- Choose topics advertisers want. A channel does not need every video to be about money. It does need one advertiser-friendly pillar, or it will always earn less.
- Front-load the value. Viewers who stay past the first ad break are the ones who see the second.
- Publish in Q4. Budget season lifts CPMs across most niches, and the effect is large enough to plan around.
- Keep the topic clean. One demonetized video in ten drags the channel average down for weeks.
None of these are loopholes. All of them are the boring parts of running a channel as a business.
When ads are the wrong model
If your niche sits at the bottom of the CPM table, chasing RPM is a losing game. Two views of the same effort produce wildly different income, and no amount of optimisation closes a tenfold gap.
In that situation the honest move is to sell something. A course, a template, a service, a community. The channel becomes distribution, and the product becomes the revenue. That is a different business plan, not a failure of the first one.
What creators actually report
Public CPM tables are estimates. Self-reported RPM figures from working channels are messier but more honest, because they include every deduction.
| Channel type | Subscribers | Reported RPM | Notes |
|---|---|---|---|
| Personal finance | 80,000 | $14 to $22 | US-heavy audience, 10 to 14 minute videos |
| Software tutorials | 150,000 | $8 to $13 | Mixed audience, strong advertiser demand |
| Camera reviews | 60,000 | $4 to $7 | Seasonal spikes in Q4 |
| Home cooking | 300,000 | $2 to $4 | Broad audience, low advertiser premium |
| Gaming commentary | 500,000 | $1.50 to $3 | Young audience, limited ad categories |
| Shorts-first channel | 1,200,000 | $0.05 to $0.15 | Per view, not per thousand |
The spread between the top and bottom row is roughly fifteen times, for the same platform and the same effort. That gap is the single most useful thing to know before choosing a niche.
Frequently asked questions
Is this accurate to the dollar?
No. It is a range from public CPM benchmarks. Your Analytics RPM is the only number that matters.
Why is my RPM lower than the calculator?
RPM counts every view, while ads only run on some. It also includes revenue from Shorts and memberships, which dilute the average.
Do Shorts really pay that little?
Per view, yes. Use them for reach and long-form for income.
Does it include sponsorships?
No. Sponsors often pay more than ads. That is a separate deal, usually priced per thousand views or per video.
What is a good RPM?
For a mixed-audience channel, anywhere from $2 to $8 is normal. Above $10 usually means a finance or B2B niche.
Can I calculate a whole channel?
Enter total views and the dominant niche. Mixed channels average out, which is fine for a rough figure.
Why do two channels with the same views earn differently?
Audience country, ad load, topic safety and viewer intent. Views are the least informative part of the equation.
More free tools for YouTube creators
AI Title Generator
48 worked title examples by niche.
Money Calculator
What a video earns before you film it.
Tag Extractor
Read the tags behind any video.
Engagement Calculator
Compare your rate with your size band.
Thumbnail Downloader
Study the covers that earned the clicks.
Channel ID Finder
Resolve a handle to the permanent UC ID.